Project: RANS21RB     -     Entry

May 02, 2024 2 Fuel Flow test and wing cuffs Category: Reassembly
Aircraft @ 10 deg nose up: Disconnected output fuel line at gascolator and ran line into graduated gas can. Turned pump on; pumped fuel until can had 1 gallon. Time was 62 seconds. This calculates to 58.06 GPH. Did final trimming and fitting of wing leading edge cuffs. Drilled for 12 attachment screws and applied VHB tape. Fastened cuffs in place and held down with sandbags for pressure on the VHB tape. EAA FTM Test Card 0 is complete.

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.